Articles in this section

Update NMC-1012 NVM from version 3.10_4.30 to 4.70

Avatar
SS Chang
  • Updated
Follow

Purpose

Release NVM update package for NMC-1012 target version from 3.10/4.30 to 4.70

 

Target Audience

Everyone who needs to update NNMC-1012 Target version from 3.10/4.30 to 4.70

 

Minimum requirement

  • The package in this FAQ supports upgrade from NMC-1012 NVM 3.10/4.30 to 4.70 only.
  • Linux based OS
  • ice driver up to 1.12.7 or beyond 

Steps

  • Download NMC1012NVM470.tgz from attachment
  • Check current nvm version from one of Ethernet device of NMC-1012 (bb3p0 as an example)

example 1: NVM 3.10

# ethtool -i bb3p0
driver: ice
version: 1.15.4
firmware-version: 4.20 0x8001fbc7 1.3346.0
expansion-rom-version:
bus-info: 0000:b3:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

example 3 : NVM 4.20

# ethtool -i bb3p0
driver: ice
version: 1.15.4
firmware-version: 4.30 0x8001de46 1.3429.0
expansion-rom-version:
bus-info: 0000:b3:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

 

example 3 : NVM 4.30

# ethtool -i bb3p0
driver: ice
version: 1.15.4
firmware-version: 4.30 0x8001de46 1.3429.0
expansion-rom-version:
bus-info: 0000:b3:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
  • Get in unzipped folder and run following command to execute update process. You should understand which device is available to be updated.

"-l nmc-1012.log" specifies the log file for recording output from the nvmupdate utility, if NMC can't success to update NVM file, please forward this log file to Advantech AE (support@advantech-ncg.zendesk.com), 

# ./nvmupdate64e -if vendor -l nmc-1012.log

Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.42.24.2
Copyright(C) 2013 - 2024 Intel Corporation.


WARNING: To avoid damage to your device, do not stop the update or reboot or power off the system during this update.
Inventory in progress. Please wait [******|...]


Num Description Ver.(hex) DevId S:B Status
=== ================================== ============ ===== ====== ==============
01) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:003 Update not
Connection available
02) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:004 Update not
Connection available
03) Intel(R) Ethernet Connection X722 N/A(N/A) 37D3 00:107 Update not
for 10GbE SFP+ available
04) Intel(R) Ethernet Controller 3.16(3.10) 1593 00:179 Update
E810-C for SFP available

Options: Adapter Index List (comma-separated), [A]ll, e[X]it

Enter selection: 04  <-please key-in NMC-1012 (E810) ID number
Would you like to back up the NVM images? [Y]es/[N]o: Y y <- suggest key-in y to backup old NVM
Update in progress. This operation may take several minutes.
[**[ 877.565785] ice 0000:b3:00.2: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0
[ 877.565812] ice 0000:b3:00.4: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 877.565896] ice 0000:b3:00.5: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 877.565981] ice 0000:b3:00.6: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 877.566054] ice 0000:b3:00.7: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 877.566129] ice 0000:b3:00.0: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 877.568180] ice 0000:b3:00.1: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 877.596059] ice 0000:b3:00.3: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 877.722028] ice 0000:b3:00.6: RDMA functionality is not available with the current device configuration.
[ 877.755237] ice 0000:b3:00.6: PTP reset successful
[ 877.787456] ice 0000:b3:00.4: RDMA functionality is not available with the current device configuration.
[ 877.817315] ice 0000:b3:00.4: PTP reset successful
[ 877.862658] ice 0000:b3:00.2: RDMA functionality is not available with the current device configuration.
[ 877.892523] ice 0000:b3:00.2: PTP reset successful
[ 877.934542] ice 0000:b3:00.3: RDMA functionality is not available with the current device configuration.
[ 877.935936] ice 0000:b3:00.1: RDMA functionality is not available with the current device configuration.
[ 877.968514] ice 0000:b3:00.1: PTP reset successful
[ 877.974069] ice 0000:b3:00.3: PTP reset successful
[ 877.999934] ice 0000:b3:00.5: RDMA functionality is not available with the current device configuration.
[ 878.028261] ice 0000:b3:00.5: PTP reset successful
[ 878.067015] ice 0000:b3:00.0: RDMA functionality is not available with the current device configuration.
[ 878.106380] ice 0000:b3:00.0: PTP reset successful
[ 878.148430] ice 0000:b3:00.6: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 878.168968] ice 0000:b3:00.6: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 878.169323] ice 0000:b3:00.7: RDMA functionality is not available with the current device configuration.
[ 878.195872] ice 0000:b3:00.7: PTP reset successful
[ 878.235883] ice 0000:b3:00.4: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 878.259672] ice 0000:b3:00.4: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 878.285450] ice 0000:b3:00.1: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 878.286854] ice 0000:b3:00.6 bb3p6: Module is not present.
[ 878.298439] ice 0000:b3:00.6 bb3p6: Possible Solution 1: Check that the module is inserted correctly.
[ 878.310530] ice 0000:b3:00.6 bb3p6: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 878.314269] ice 0000:b3:00.1: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 878.327044] ice 0000:b3:00.6 bb3p6: Port Number: 2.
[ 878.332361] ice 0000:b3:00.0: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 878.355907] ice 0000:b3:00.0: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 878.365961] ice 0000:b3:00.4 bb3p4: Module is not present.
[ 878.374428] ice 0000:b3:00.4 bb3p4: Possible Solution 1: Check that the module is inserted correctly.
[ 878.387026] ice 0000:b3:00.4 bb3p4: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 878.393057] ice 0000:b3:00.1 bb3p1: Module is not present.
[ 878.405725] ice 0000:b3:00.4 bb3p4: Port Number: 6.
[ 878.407068] ice 0000:b3:00.1 bb3p1: Possible Solution 1: Check that the module is inserted correctly.
[ 878.424729] ice 0000:b3:00.3: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 878.430563] ice 0000:b3:00.1 bb3p1: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 878.454957] ice 0000:b3:00.1 bb3p1: Port Number: 5.
[ 878.455277] ice 0000:b3:00.3: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 878.459196] ice 0000:b3:00.0 bb3p0: Module is not present.
[ 878.476349] ice 0000:b3:00.0 bb3p0: Possible Solution 1: Check that the module is inserted correctly.
[ 878.485948] ice 0000:b3:00.0 bb3p0: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 878.489940] ice 0000:b3:00.3 bb3p3: Module is not present.
[ 878.496213] ice 0000:b3:00.2: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 878.501452] ice 0000:b3:00.2: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 878.502118] ice 0000:b3:00.0 bb3p0: Port Number: 7.
[ 878.502538] ice 0000:b3:00.3 bb3p3: Possible Solution 1: Check that the module is inserted correctly.
[ 878.531269] ice 0000:b3:00.2 bb3p2: Module is not present.
[ 878.532306] ice 0000:b3:00.3 bb3p3: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 878.532722] ice 0000:b3:00.2 bb3p2: Possible Solution 1: Check that the module is inserted correctly.
[ 878.533539] ice 0000:b3:00.3 bb3p3: Port Number: 1.
[ 878.533956] ice 0000:b3:00.2 bb3p2: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 878.549618] ice 0000:b3:00.5: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 878.549927] ice 0000:b3:00.2 bb3p2: Port Number: 3.
[ 878.555861] ice 0000:b3:00.5: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 878.599840] ice 0000:b3:00.7: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 878.617694] ice 0000:b3:00.5 bb3p5: Module is not present.
[ 878.627943] ice 0000:b3:00.5 bb3p5: Possible Solution 1: Check that the module is inserted correctly.
[ 878.639839] ice 0000:b3:00.5 bb3p5: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 878.659560] ice 0000:b3:00.5 bb3p5: Port Number: 4.
[ 878.661014] ice 0000:b3:00.7: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 878.690789] ice 0000:b3:00.7 bb3p7: Module is not present.
[ 878.696722] ice 0000:b3:00.7 bb3p7: Possible Solution 1: Check that the module is inserted correctly.
[ 878.706379] ice 0000:b3:00.7 bb3p7: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 878.722637] ice 0000:b3:00.7 bb3p7: Port Number: 0.
*-


Num Description Ver.(hex) DevId S:B Status
=== ================================== ============ ===== ====== ==============
01) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:003 Update not
Connection available
02) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:004 Update not
Connection available
03) Intel(R) Ethernet Connection X722 N/A(N/A) 37D3 00:107 Update not
for 10GbE SFP+ available
04) Intel(R) Ethernet Controller 4.112(4.70) 1593 00:179 Update
E810-C for SFP successful

A reboot is required to complete the update process.

Tool execution completed with the following status: All operations completed successfully.
Press any key to exit.
  • Wait few minutes for completing the upgrade process, you will find “All operations completed successfully” shown on screen after it completed, and follow the message to exit the utility.  
  • Power OFF and ON to apply the changes. 
  • Check nvm version from one of Ethernet device of NMC-6003L (bb3p0 as an example) 
# ethtool -i bb3p0
driver: ice
version: 1.15.4
firmware-version: 4.70 0x80020660 1.3755.0
expansion-rom-version:
bus-info: 0000:b3:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

 

Check VPD info from Advantech network device  (Assume device NMC-1012 on bus b5:00.0)

# lspci -s b3:00.0 -vvv |grep -i "Vendor specific"
[V0] Vendor specific: N840
[V1] Vendor specific: V4.70
[V2] Vendor specific: V4.70.02
# lspci -s b3:00.0 -vvv | head -n 4
b3:00.0 Ethernet controller: Intel Corporation Ethernet Controller E810-C for SFP (rev 02)
Subsystem: Advantech Co. Ltd Ethernet Controller E810-C for SFP
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

 

Check SVID: 13FE and SDID: 205A  with the command.

# ./nvmupdate64e -i -o
----------
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.40.5.5
Copyright(C) 2013 - 2023 Intel Corporation.

-----------
 <Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="179" dev="0" func="0" PBA="N/A" port_id="Port 1 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.31" update="0">
</Module>
<Module type="EFI" version="4.3.15" update="0">
</Module>
<Module type="EFI_AARCH64" version="4.3.15" update="0">
</Module>
<Module type="Netlist" version="4.4.5.1" update="0">
</Module>
<Module type="NVM" version="80020660" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.70</VPDField>
<VPDField type="Readable" key="V2">V4.70.02</VPDField>
<VPDField type="Checksum" key="RV">64</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120618">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="179" dev="0" func="1" PBA="N/A" port_id="Port 2 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.31" update="0">
</Module>
<Module type="EFI" version="4.3.15" update="0">
</Module>
<Module type="EFI_AARCH64" version="4.3.15" update="0">
</Module>
<Module type="Netlist" version="4.4.5.1" update="0">
</Module>
<Module type="NVM" version="80020660" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.70</VPDField>
<VPDField type="Readable" key="V2">V4.70.02</VPDField>
<VPDField type="Checksum" key="RV">64</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120619">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="179" dev="0" func="2" PBA="N/A" port_id="Port 3 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.31" update="0">
</Module>
<Module type="EFI" version="4.3.15" update="0">
</Module>
<Module type="EFI_AARCH64" version="4.3.15" update="0">
</Module>
<Module type="Netlist" version="4.4.5.1" update="0">
</Module>
<Module type="NVM" version="80020660" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.70</VPDField>
<VPDField type="Readable" key="V2">V4.70.02</VPDField>
<VPDField type="Checksum" key="RV">64</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F12061A">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="179" dev="0" func="3" PBA="N/A" port_id="Port 4 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.31" update="0">
</Module>
<Module type="EFI" version="4.3.15" update="0">
</Module>
<Module type="EFI_AARCH64" version="4.3.15" update="0">
</Module>
<Module type="Netlist" version="4.4.5.1" update="0">
</Module>
<Module type="NVM" version="80020660" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.70</VPDField>
<VPDField type="Readable" key="V2">V4.70.02</VPDField>
<VPDField type="Checksum" key="RV">64</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F12061B">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="179" dev="0" func="4" PBA="N/A" port_id="Port 5 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.31" update="0">
</Module>
<Module type="EFI" version="4.3.15" update="0">
</Module>
<Module type="EFI_AARCH64" version="4.3.15" update="0">
</Module>
<Module type="Netlist" version="4.4.5.1" update="0">
</Module>
<Module type="NVM" version="80020660" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.70</VPDField>
<VPDField type="Readable" key="V2">V4.70.02</VPDField>
<VPDField type="Checksum" key="RV">64</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F12061C">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="179" dev="0" func="5" PBA="N/A" port_id="Port 6 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.31" update="0">
</Module>
<Module type="EFI" version="4.3.15" update="0">
</Module>
<Module type="EFI_AARCH64" version="4.3.15" update="0">
</Module>
<Module type="Netlist" version="4.4.5.1" update="0">
</Module>
<Module type="NVM" version="80020660" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.70</VPDField>
<VPDField type="Readable" key="V2">V4.70.02</VPDField>
<VPDField type="Checksum" key="RV">64</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F12061D">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="179" dev="0" func="6" PBA="N/A" port_id="Port 7 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.31" update="0">
</Module>
<Module type="EFI" version="4.3.15" update="0">
</Module>
<Module type="EFI_AARCH64" version="4.3.15" update="0">
</Module>
<Module type="Netlist" version="4.4.5.1" update="0">
</Module>
<Module type="NVM" version="80020660" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.70</VPDField>
<VPDField type="Readable" key="V2">V4.70.02</VPDField>
<VPDField type="Checksum" key="RV">64</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F12061E">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="179" dev="0" func="7" PBA="N/A" port_id="Port 8 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.31" update="0">
</Module>
<Module type="EFI" version="4.3.15" update="0">
</Module>
<Module type="EFI_AARCH64" version="4.3.15" update="0">
</Module>
<Module type="Netlist" version="4.4.5.1" update="0">
</Module>
<Module type="NVM" version="80020660" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.70</VPDField>
<VPDField type="Readable" key="V2">V4.70.02</VPDField>
<VPDField type="Checksum" key="RV">64</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F12061F">
</MAC>
</MACAddresses>
</Instance>
</DeviceInventory>

 

 

 

 

Related articles

Comments

0 comments

Please sign in to leave a comment.