Purpose:
It lists Advantech XL710 Device ID rule for customer reference,
Target Audience:
For Advantech TSE, RBU AE, outsourcing service engineer(s) and End customer with the following knowledges :
- Intel NVM troubleshooting experience
Content:
Please check following picture, customer asks why Linux detects Advantech 10Gb NMC module (chip: XL710) device ID as 8086:1572 (Chip: X710)
Using Linux command detects NMC-1001 main chip ID as Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572]
# lspci -nn | grep -i 710
1a:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] (rev 02)
1a:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] (rev 02)
1a:00.2 Ethernet controller [0200]: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] (rev 02)
1a:00.3 Ethernet controller [0200]: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] (rev 02)
[Analysis]
Please check following table, Intel defined "SFI 10Gb port device ID" as 8086:1572,
Following this rule , The Linux devices ID of all Advantech 10Gb NMC module (chip: XL710) are defined as X710 for 10GbE SFP+ [8086:1572]
Chip |
Type |
Model |
Speed |
Linux Chip ID |
FTXL710-BM1 |
NMC module |
NMC-1001 |
10GbE |
Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] |
NMC-4005 |
10GbE |
Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] |
||
NMC-1010 |
10GbE |
Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] |
||
NMC-1009 |
10GbE |
Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] |
||
SKY-server |
SKY-7223 MB |
10GbE |
Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] |
|
PCIE card |
PCIE-2232(older name:PCIE-2202) |
10GbE |
Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] |
|
FTXL710-BM2 |
NMC module |
NMC-4007 |
10GbE |
Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572] |
Comments
0 comments
Please sign in to leave a comment.