Sharing how to install LOM board on FWA-3033.
1. Make sure the LOM port is aligned with the MB LOM port then install it.
2. Fix the LOM with two screws.
1. The default BIOS setting for "primary display" is "auto", so if LOM board is added, the dispaly output will change from onboard VGA/HDMI to BMC VGA.
If you want to use onboard VGA/HDMI with LOM Board mounted, please change "primary display" from "auto" to "IGFX"
2. Attachment is FWA-3033_LOM_PIN definition
Please sign in to leave a comment.