How to disable "One BMC FW" alarm functionality if the system only plug in a PSU power cord

Purpose:

It lists a disabled BMC alarm command for user reference, 

Target Audience:

For Advantech TSE, RBU AE, outsourcing service engineer(s)  the following knowledge  :

• Linux troubleshooting experience
• IPMI command troubleshooting experience

Content:

• 1. This command is specifically for supported One BMC platforms (e.g., FWA-6172/6072/5072...) with One BMC firmware version V0.76 or higher.
• Please key-in following command to verify system's BMC FW version ,if the system's One BMC is the older version (ex: before V0.76), please require new "One BMC FW" from Advantech 

# ipmitool hpm check

Example

• Please key-in following command to disable BMC alarm if the system only plugs in a PSU power cord (or insert a PSU module)

# ipmitool raw 0x2e 0x63 0x39 0x28 0x00
39 28 00