Purpose
Release NVM update package for NMC-1012 target version from 3.10/4.30 to 4.20
Target Audience
Everyone who needs to update NNMC-1012 Target version from 3.10/4.30 to 4.20
Minimum requirement
- The package in this FAQ supports upgrade from NMC-1012 NVM 3.10 & 4.30 only.
- Linux based OS
- ice driver up to 1.12.7 or beyond (see driver requirement)
Steps
1. Download NMC-1012_NVM420.tgz from attachment
2. Check current nvm version from one of Ethernet device of NMC-1012 (bb5p0 as an example)
example 1: NVM 3.10
# ethtool -i bb5p0
driver: ice
version: 1.15.4
firmware-version: 3.10 0x8000defd 1.3106.0
expansion-rom-version:
bus-info: 0000:b5:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
example 2: NVM 4.30
# ethtool -i bb5p0
driver: ice
version: 1.15.4
firmware-version: 4.30 0x8001de46 1.3429.0
expansion-rom-version:
bus-info: 0000:b5:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
3. Get in unzipped folder and run following command to execute update process. You should understand which device is available to be updated.
"-l nmc-1012.log" specifies the log file for recording output from the nvmupdate utility, if NMC can't success to update NVM file, please forward this log file to Advantech FAE (support@advantech-ncg.zendesk.com),
# ./nvmupdate64e -if ioctl -l nmc-1012.log
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.40.5.5
Copyright(C) 2013 - 2023 Intel Corporation.
WARNING: To avoid damage to your device, do not stop the update or reboot or power off the system during this update.
Inventory in progress. Please wait [******|...]
Num Description Ver.(hex) DevId S:B Status
=== ================================== ============ ===== ====== ==============
01) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:003 Update not
Connection available
02) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:004 Update not
Connection available
03) Intel(R) Ethernet Controller 3.16(3.10) 1593 00:181 Update
E810-C for SFP available
Options: Adapter Index List (comma-separated), [A]ll, e[X]it
Enter selection: 03 <-please key-in NMC-1012 (E810) ID number
Would you like to back up the NVM images? [Y]es/[N]o: Y y <- suggest key-in y to backup old NVM
Update in progress. This operation may take several minutes.
[*-........]
Update in progress. This operation may take several minutes.
[**[ 604.672128] ice 0000:b5:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0
[ 604.672152] ice 0000:b5:00.2: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.672257] ice 0000:b5:00.3: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.672335] ice 0000:b5:00.4: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.672437] ice 0000:b5:00.5: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.675785] ice 0000:b5:00.6: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.693820] ice 0000:b5:00.7: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.737673] ice 0000:b5:00.1: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 605.064319] ice 0000:b5:00.3: RDMA functionality is not available with the current device configuration.
[ 605.122472] ice 0000:b5:00.3: PTP reset successful
[ 605.367372] ice 0000:b5:00.0: RDMA functionality is not available with the current device configuration.
[ 605.449395] ice 0000:b5:00.0: PTP reset successful
[ 605.449404] ice 0000:b5:00.7: 8697 msecs passed between update to cached PHC time
[ 605.982287] ice 0000:b5:00.3: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 606.056036] ice 0000:b5:00.3: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 606.302746] ice 0000:b5:00.0: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 606.317930] ice 0000:b5:00.6: RDMA functionality is not available with the current device configuration.
[ 606.355318] ice 0000:b5:00.0: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 606.357460] ice 0000:b5:00.6: PTP reset successful
[ 606.499000] ice 0000:b5:00.3 bb5p3: Module is not present.
[ 606.505233] ice 0000:b5:00.3 bb5p3: Possible Solution 1: Check that the module is inserted correctly.
[ 606.514892] ice 0000:b5:00.3 bb5p3: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 606.531113] ice 0000:b5:00.3 bb5p3: Port Number: 1.
[ 606.721584] ice 0000:b5:00.7: RDMA functionality is not available with the current device configuration.
[ 606.779240] ice 0000:b5:00.7: PTP reset successful
[ 607.124821] ice 0000:b5:00.0 bb5p0: Module is not present.
[ 607.130744] ice 0000:b5:00.0 bb5p0: Possible Solution 1: Check that the module is inserted correctly.
[ 607.140382] ice 0000:b5:00.0 bb5p0: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 607.156610] ice 0000:b5:00.0 bb5p0: Port Number: 7.
[ 607.264304] ice 0000:b5:00.5: RDMA functionality is not available with the current device configuration.
[ 607.283552] ice 0000:b5:00.2: RDMA functionality is not available with the current device configuration.
[ 607.308448] ice 0000:b5:00.6: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 607.323637] ice 0000:b5:00.5: PTP reset successful
[ 607.363733] ice 0000:b5:00.2: PTP reset successful
[ 607.365307] ice 0000:b5:00.6: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 607.691116] ice 0000:b5:00.7: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 607.764331] ice 0000:b5:00.7: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 607.785475] ice 0000:b5:00.1: RDMA functionality is not available with the current device configuration.
[ 607.845037] ice 0000:b5:00.1: PTP reset successful
[ 608.294396] ice 0000:b5:00.4: RDMA functionality is not available with the current device configuration.
[ 608.370212] ice 0000:b5:00.4: PTP reset successful
[ 608.372590] ice 0000:b5:00.6 bb5p6: Module is not present.
[ 608.381381] ice 0000:b5:00.6 bb5p6: Possible Solution 1: Check that the module is inserted correctly.
[ 608.393352] ice 0000:b5:00.6 bb5p6: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 608.395089] ice 0000:b5:00.5: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 608.409529] ice 0000:b5:00.6 bb5p6: Port Number: 2.
[ 608.434900] ice 0000:b5:00.5: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 608.600715] ice 0000:b5:00.2: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 608.653411] ice 0000:b5:00.2: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 608.674936] ice 0000:b5:00.7 bb5p7: Module is not present.
[ 608.680853] ice 0000:b5:00.7 bb5p7: Possible Solution 1: Check that the module is inserted correctly.
[ 608.690498] ice 0000:b5:00.7 bb5p7: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 608.706735] ice 0000:b5:00.7 bb5p7: Port Number: 0.
[ 608.798388] ice 0000:b5:00.1: VSI rebuilt. VSI index 0, type ICE_VSI_PF
Num Description Ver.(hex) DevId S:B Status
=== ================================== ============ ===== ====== ==============
01) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:003 Update not
Connection available
02) Intel(R) I210 Gigabit Networ[ 608.835803] ice 0000:b5:00.1: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
k N/A(N/A) 1533 00:004 Update not
Connection available
03) Intel(R) Ethernet Controller 4.32(4.20) 1593 00:181 Update
E810-C for SFP successful
A reboot is required to complete the update process.
Tool execution completed with the following status: All operations completed successfully.
Press any key to exit.
- Wait few minutes for completing the upgrade process, you will find “All operations completed successfully” shown on screen after it completed, and follow the message to exit the utility.
- Power OFF and ON to apply the changes.
- Check nvm version from one of Ethernet device of NMC-6003L (bb5p0 as an example)
# ethtool -i bb5p0
driver: ice
version: 1.15.4
firmware-version: 4.20 0x8001f1e6 1.3346.0
expansion-rom-version:
bus-info: 0000:b5:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
Check VPD info from Advantech network device (Assume device NMC-1012 on bus b5:00.0)
# lspci -s b5:00.0 -vvv |grep -i "Vendor specific"
[V0] Vendor specific: N840
[V1] Vendor specific: V4.20
[V2] Vendor specific: V4.20.01
# lspci -s b5:00.0 -vvv | head -n 4
b5:00.0 Ethernet controller: Intel Corporation Ethernet Controller E810-C for SFP (rev 02)
Subsystem: Advantech Co. Ltd Ethernet Controller E810-C for SFP
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Check SVID: 13FE and SDID: 205A with the command.
# ./nvmupdate64e -i -o
----------
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.40.5.5
Copyright(C) 2013 - 2023 Intel Corporation.
-----------
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="0" PBA="" port_id="Port 1 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.3.3.1" update="0">
</Module>
<Module type="NVM" version="8001F1E6" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.01</VPDField>
<VPDField type="Checksum" key="RV">6F</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120560">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="1" PBA="" port_id="Port 2 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.3.3.1" update="0">
</Module>
<Module type="NVM" version="8001F1E6" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.01</VPDField>
<VPDField type="Checksum" key="RV">6F</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120561">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="2" PBA="" port_id="Port 3 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.3.3.1" update="0">
</Module>
<Module type="NVM" version="8001F1E6" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.01</VPDField>
<VPDField type="Checksum" key="RV">6F</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120562">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="3" PBA="" port_id="Port 4 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.3.3.1" update="0">
</Module>
<Module type="NVM" version="8001F1E6" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.01</VPDField>
<VPDField type="Checksum" key="RV">6F</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120563">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="4" PBA="" port_id="Port 5 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.3.3.1" update="0">
</Module>
<Module type="NVM" version="8001F1E6" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.01</VPDField>
<VPDField type="Checksum" key="RV">6F</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120564">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="5" PBA="" port_id="Port 6 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.3.3.1" update="0">
</Module>
<Module type="NVM" version="8001F1E6" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.01</VPDField>
<VPDField type="Checksum" key="RV">6F</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120565">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="6" PBA="" port_id="Port 7 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.3.3.1" update="0">
</Module>
<Module type="NVM" version="8001F1E6" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.01</VPDField>
<VPDField type="Checksum" key="RV">6F</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120566">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="7" PBA="" port_id="Port 8 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.3.3.1" update="0">
</Module>
<Module type="NVM" version="8001F1E6" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.01</VPDField>
<VPDField type="Checksum" key="RV">6F</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120567">
</MAC>
</MACAddresses>
</Instance>
</DeviceInventory>
Comments
0 comments
Please sign in to leave a comment.