Articles in this section

Update NMC-1012 NVM from version 3.10/4.30 & 4.2 (Port 5 Active LED not workable ) to 4.20 (fix Port5 Active LED issue)

Avatar
SS Chang
  • Updated
Follow

Purpose

Release NVM update package for NMC-1012 target version from 3.10/4.30 & 4.2 (Port 5 Active LED not workable ) to 4.20 (fix Port5 Active LED issue)

NVM42.jpg

Target Audience

Everyone who needs to update NNMC-1012 Target version from 3.10/4.30 to 4.20

 

Minimum requirement

  1. The package in this FAQ supports upgrade from NMC-1012 NVM 3.10 & 4.30 only.
  2. Linux based OS
  3. ice driver up to 1.12.7 or beyond (see driver requirement)

Steps
      1. Download NMC1012_NVM420_8001FBC7.tgz from attachment
      2. Check current nvm version from one of Ethernet device of NMC-1012 (bb5p0 as an example)

example 1: NVM 3.10

# ethtool -i bb5p0
driver: ice
version: 1.15.4
firmware-version: 3.10 0x8000defd 1.3106.0
expansion-rom-version:
bus-info: 0000:b5:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

 

example 2: NVM 4.30

# ethtool -i bb5p0
driver: ice
version: 1.15.4
firmware-version: 4.30 0x8001de46 1.3429.0
expansion-rom-version:
bus-info: 0000:b5:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

example 3: NVM 4.20 (Port 5 Active LED not workable )

# ethtool -i bb5p0
driver: ice
version: 1.15.4
firmware-version: 4.20 0x8001f1e6 1.3346.0
expansion-rom-version:
bus-info: 0000:b5:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

 

3. Get in unzipped folder and run following command to execute update process. You should understand which device is available to be updated.

"-l nmc-1012.log" specifies the log file for recording output from the nvmupdate utility, if NMC can't success to update NVM file, please forward this log file to Advantech FAE (support@advantech-ncg.zendesk.com), 

# ./nvmupdate64e -if ioctl -l nmc-1012.log
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.40.5.5
Copyright(C) 2013 - 2023 Intel Corporation.


WARNING: To avoid damage to your device, do not stop the update or reboot or power off the system during this update.
Inventory in progress. Please wait [******|...]


Num Description Ver.(hex) DevId S:B Status
=== ================================== ============ ===== ====== ==============
01) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:003 Update not
Connection available 
02) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:004 Update not
Connection available 
03) Intel(R) Ethernet Controller 3.16(3.10) 1593 00:181 Update 
E810-C for SFP available

Options: Adapter Index List (comma-separated), [A]ll, e[X]it
Enter selection: 03  <-please key-in NMC-1012 (E810) ID number
Would you like to back up the NVM images? [Y]es/[N]o: Y y <- suggest key-in y to backup old NVM
Update in progress. This operation may take several minutes.
[*-........]

Update in progress. This operation may take several minutes.
[**[ 604.672128] ice 0000:b5:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0
[ 604.672152] ice 0000:b5:00.2: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.672257] ice 0000:b5:00.3: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.672335] ice 0000:b5:00.4: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.672437] ice 0000:b5:00.5: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.675785] ice 0000:b5:00.6: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.693820] ice 0000:b5:00.7: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 604.737673] ice 0000:b5:00.1: DDP package already present on device: ICE OS Default Package version 1.3.36.0
[ 605.064319] ice 0000:b5:00.3: RDMA functionality is not available with the current device configuration.
[ 605.122472] ice 0000:b5:00.3: PTP reset successful
[ 605.367372] ice 0000:b5:00.0: RDMA functionality is not available with the current device configuration.
[ 605.449395] ice 0000:b5:00.0: PTP reset successful
[ 605.449404] ice 0000:b5:00.7: 8697 msecs passed between update to cached PHC time
[ 605.982287] ice 0000:b5:00.3: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 606.056036] ice 0000:b5:00.3: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 606.302746] ice 0000:b5:00.0: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 606.317930] ice 0000:b5:00.6: RDMA functionality is not available with the current device configuration.
[ 606.355318] ice 0000:b5:00.0: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 606.357460] ice 0000:b5:00.6: PTP reset successful
[ 606.499000] ice 0000:b5:00.3 bb5p3: Module is not present.
[ 606.505233] ice 0000:b5:00.3 bb5p3: Possible Solution 1: Check that the module is inserted correctly.
[ 606.514892] ice 0000:b5:00.3 bb5p3: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 606.531113] ice 0000:b5:00.3 bb5p3: Port Number: 1.
[ 606.721584] ice 0000:b5:00.7: RDMA functionality is not available with the current device configuration.
[ 606.779240] ice 0000:b5:00.7: PTP reset successful
[ 607.124821] ice 0000:b5:00.0 bb5p0: Module is not present.
[ 607.130744] ice 0000:b5:00.0 bb5p0: Possible Solution 1: Check that the module is inserted correctly.
[ 607.140382] ice 0000:b5:00.0 bb5p0: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 607.156610] ice 0000:b5:00.0 bb5p0: Port Number: 7.
[ 607.264304] ice 0000:b5:00.5: RDMA functionality is not available with the current device configuration.
[ 607.283552] ice 0000:b5:00.2: RDMA functionality is not available with the current device configuration.
[ 607.308448] ice 0000:b5:00.6: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 607.323637] ice 0000:b5:00.5: PTP reset successful
[ 607.363733] ice 0000:b5:00.2: PTP reset successful
[ 607.365307] ice 0000:b5:00.6: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 607.691116] ice 0000:b5:00.7: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 607.764331] ice 0000:b5:00.7: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 607.785475] ice 0000:b5:00.1: RDMA functionality is not available with the current device configuration.
[ 607.845037] ice 0000:b5:00.1: PTP reset successful
[ 608.294396] ice 0000:b5:00.4: RDMA functionality is not available with the current device configuration.
[ 608.370212] ice 0000:b5:00.4: PTP reset successful
[ 608.372590] ice 0000:b5:00.6 bb5p6: Module is not present.
[ 608.381381] ice 0000:b5:00.6 bb5p6: Possible Solution 1: Check that the module is inserted correctly.
[ 608.393352] ice 0000:b5:00.6 bb5p6: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 608.395089] ice 0000:b5:00.5: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 608.409529] ice 0000:b5:00.6 bb5p6: Port Number: 2.
[ 608.434900] ice 0000:b5:00.5: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 608.600715] ice 0000:b5:00.2: VSI rebuilt. VSI index 0, type ICE_VSI_PF
[ 608.653411] ice 0000:b5:00.2: VSI rebuilt. VSI index 1, type ICE_VSI_CTRL
[ 608.674936] ice 0000:b5:00.7 bb5p7: Module is not present.
[ 608.680853] ice 0000:b5:00.7 bb5p7: Possible Solution 1: Check that the module is inserted correctly.
[ 608.690498] ice 0000:b5:00.7 bb5p7: Possible Solution 2: If the problem persists, use a cable/module that is found in the supported modules and cables list for this device.
[ 608.706735] ice 0000:b5:00.7 bb5p7: Port Number: 0.
[ 608.798388] ice 0000:b5:00.1: VSI rebuilt. VSI index 0, type ICE_VSI_PF


Num Description Ver.(hex) DevId S:B Status
=== ================================== ============ ===== ====== ==============
01) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:003 Update not
Connection available
02) Intel(R) I210 Gigabit Network N/A(N/A) 1533 00:004 Update not
Connection available
03) Intel(R) Ethernet Connection X722 N/A(N/A) 37D3 00:107 Update not
for 10GbE SFP+ available
04) Intel(R) Ethernet Controller 4.32(4.20) 1593 00:181 Update
E810-C for SFP successful

A reboot is required to complete the update process.

Tool execution completed with the following status: All operations completed successfully.
Press any key to exit.
  1. Wait few minutes for completing the upgrade process, you will find “All operations completed successfully” shown on screen after it completed, and follow the message to exit the utility.  
  2. Power OFF and ON to apply the changes. 
  3. Check nvm version from one of Ethernet device of NMC-6003L (bb5p0 as an example) 
# ethtool -i bb5p0
driver: ice
version: 1.15.4
firmware-version: 4.20 0x8001fbc7 1.3346.0
expansion-rom-version:
bus-info: 0000:b5:00.4
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

Check VPD info from Advantech network device  (Assume device NMC-1012 on bus b5:00.0)

# lspci -s b5:00.0 -vvv |grep -i "Vendor specific"
[V0] Vendor specific: N840
[V1] Vendor specific: V4.20
[V2] Vendor specific: V4.20.01
# lspci -s b5:00.0 -vvv | head -n 4
b5:00.0 Ethernet controller: Intel Corporation Ethernet Controller E810-C for SFP (rev 02)
Subsystem: Advantech Co. Ltd Ethernet Controller E810-C for SFP
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Check SVID: 13FE and SDID: 205A  with the command.

# ./nvmupdate64e -i -o
----------
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.40.5.5
Copyright(C) 2013 - 2023 Intel Corporation.

-----------
 <Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="0" PBA="" port_id="Port 1 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.4.4.1" update="0">
</Module>
<Module type="NVM" version="8001FBC7" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.02</VPDField>
<VPDField type="Checksum" key="RV">6E</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120560">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="1" PBA="" port_id="Port 2 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.4.4.1" update="0">
</Module>
<Module type="NVM" version="8001FBC7" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.02</VPDField>
<VPDField type="Checksum" key="RV">6E</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120561">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="2" PBA="" port_id="Port 3 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.4.4.1" update="0">
</Module>
<Module type="NVM" version="8001FBC7" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.02</VPDField>
<VPDField type="Checksum" key="RV">6E</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120562">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="3" PBA="" port_id="Port 4 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.4.4.1" update="0">
</Module>
<Module type="NVM" version="8001FBC7" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.02</VPDField>
<VPDField type="Checksum" key="RV">6E</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120563">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="4" PBA="" port_id="Port 5 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.4.4.1" update="0">
</Module>
<Module type="NVM" version="8001FBC7" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.02</VPDField>
<VPDField type="Checksum" key="RV">6E</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120564">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="5" PBA="" port_id="Port 6 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.4.4.1" update="0">
</Module>
<Module type="NVM" version="8001FBC7" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.02</VPDField>
<VPDField type="Checksum" key="RV">6E</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120565">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="6" PBA="" port_id="Port 7 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.4.4.1" update="0">
</Module>
<Module type="NVM" version="8001FBC7" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.02</VPDField>
<VPDField type="Checksum" key="RV">6E</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120566">
</MAC>
</MACAddresses>
</Instance>
<Instance vendor="8086" device="1593" subdevice="205A" subvendor="13FE" bus="181" dev="0" func="7" PBA="" port_id="Port 8 of 8" display="Intel(R) Ethernet Controller E810-C for SFP">
<Module type="PXE" version="2.6.1" update="0">
</Module>
<Module type="EFI" version="4.0.48" update="0">
</Module>
<Module type="Netlist" version="4.4.4.1" update="0">
</Module>
<Module type="NVM" version="8001FBC7" update="0">
</Module>
<VPD>
<VPDField type="String">NMC-1012FN </VPDField>
<VPDField type="Readable" key="MN">13FE</VPDField>
<VPDField type="Readable" key="V0">N840</VPDField>
<VPDField type="Readable" key="V1">V4.20</VPDField>
<VPDField type="Readable" key="V2">V4.20.02</VPDField>
<VPDField type="Checksum" key="RV">6E</VPDField>
</VPD>
<MACAddresses>
<MAC address="CC827F120567">
</MAC>
</MACAddresses>
</Instance>
</DeviceInventory>

Related articles

Comments

0 comments

Please sign in to leave a comment.