Please refer following steps when user needs to create 2 SATA M.2 modules as a Intel RSTe RAID,
1. Please install 2 SATA M.2 modules in FWA-6170
2. Please check sSATA port1 & sSATA port5 detecting SATA M.2 module or not,
3. Please set sSATA controller as "Enabled" and Set sSATA Mode as "RAID"
4. Please save BIOS setting and reboot system, and please press "Ctrl-I" to login Intel RSTe RAID
5. Please refer Intel RSTe RAID manual to create SATA M.2 modules as a RAID 0/1