FWA-1012VC/FWA-1112VC BIOS UEFI flash method by AMI flashing utility (AfuEfix64.efi)

Purpose:

It lists how to use AMI utility to flash  FWA-1012VC/1112VC BIOS  for customer reference, 

Target Audience:

For Advantech TSE, RBU AE, outsourcing service engineer(s) and End customer with the following knowledges  :

• BIOS flashing  troubleshooting experience

Description:

FWA-1012VC doesn’t have BMC to support remote BIOS flashing, it needs using AMI flash utility to upgrade BIOS, please refer following steps to flash FWA-1012VC BIOS in UEFI shell.

For Intel utility, refer to URL link as below for internal only.

FWA-1012VC BIOS UEFI flash method – Advantech Cloud IoT Service Portal (zendesk.com)

Method:

1. Download AMI Firmware Update utilities

AMI flashing utility Web: https://www.ami.com/bios-uefi-utilities/ 

Please link AMI web and download AMI Firmware Update utilities –“Aptio V”

 

1. Flash BIOS file

Please copy FWA-1012VC BIOS file & AMI Firmware Update utilities (AfuEfix64.efi) in USB, and refer following step to flashing FWA-1012VC BIOS (FWA-1112VC BIOS flash can be checked in attachment file)

1. Please login BIOS and choose “UEFI: Built-in EFI Shell” in Override.

 

1. Please key-in command into FWA-1012 BIOS file folder which contains flash utility & BIOS file

Shell> fs0:    
FS0:\> cd 1012 
FS0:\1012\> cd ami
FS0:\1012\ami\> ls
Directory of: FS0:\1012\ami\
Directory of: FS0:\1012\ami\
11/02/2018  11:11 <DIR>         8,192  .
11/02/2018  11:11 <DIR>         8,192  ..
10/16/2018  17:31             555,632  AfuEfix64.efi
03/15/2019 17:30         16,777,216 1012VC0SS60E110.binn
          2 File(s)  17,332,848 bytes

2. Please key-in following command & parameters to flash FWA-1012 BIOS to E110, following step will flashes BIOS block, when utility shows “Process completed”, it means flashing BIOS finish.

* Newer AFU utility may have NO /B parameter

FS0:\1012\ami\> AfuEfix64.efi 1012VC0SS60E110.bin /P /B /N /X 

+---------------------------------------------------------------------------+
|                 AMI Firmware Update Utility v5.11.06.1854                 |
|      Copyright (C)2018 American Megatrends Inc. All Rights Reserved.      |
+---------------------------------------------------------------------------+
Reading flash ............... done
- ME Data Size checking . ok
- FFS checksums ......... ok
- Check RomLayout ........ ok.
Erasing Boot Block .......... done
Updating Boot Block ......... done
Verifying Boot Block ........ done
Erasing Main Block .......... done
Updating Main Block ......... done
Verifying Main Block ........ done
Erasing NVRAM Block ......... done
Updating NVRAM Block ........ done
Verifying NVRAM Block ....... done
Process completed.

Please power off, wait 2~3 seconds, and power on system again, system doesn’t power up immediately after flashing BIOS, it needs waiting new BIOS scanning configuration ( 30~50 seconds). Few times auto reboot is normal behaviors, but should not be in dead lock (endless reboot)