NMC-6002FD (chip:Mellanox ConnectX-5) Firmware 16.35 and Firmware upgraded step.

Purpose:

It provides NMC-6003 Firmware 16.35 for customer upgraded by themselves,

Target Audience:

For Advantech TSE, RBU AE, outsourcing service engineer(s) and End customer with the following knowledges  :

• Mellanox Firmware troubleshooting experience

Content:

1. The NMC-6002FD firmware version 16.35 is available for download. However, to install the firmware, users need to download and install the Firmware Upgrade Utility (MST) from the NVIDIA website., 

https://network.nvidia.com/products/adapter-software/firmware-tools/ 

2. Please refer following table to upgrade  NMC-6002FD Firmware 16.3. 

item	command
MST enabled	# mst start Starting MST (Mellanox Software Tools) driver set Loading MST PCI module - Success Loading MST PCI configuration module - Success Create devices Unloading MST PCI module (unused) - Success
FW 16.35 upgraded	# flint -d /dev/mst/mt4119_pciconf0 -i fw-ConnectX5-rel-16_35_2000-Advantech_NMC-6002_2P_100G-UEFI-14.28.16-FlexBoot-3.6.805-20230324.bin -y burn     Current FW version on flash:  16.27.2008     New FW version:               16.35.2000 FSMST_INITIALIZE -   OK Writing Boot image component -   OK -I- To load new FW run mlxfwreset or reboot machine.