FWA-3034H (Non-BMC) Bypass configuration file setting

Purpose:

It lists FWA-3034H (Non-BMC version) LAN bypass configuration setting for customer reference, 

Target Audience:

For Advantech TSE, RBU AE, outsourcing service engineer(s) and End customer with the following knowledges  :

• Advantech NDI utility troubleshooting experience, and please download Advantech NDI utility  from Advantech Server_iManager (included apdi ).
• Advantech Advanced LAN bypass utility (lbpcu) utility troubleshooting experience

Content:

1. FWA-3034H (Non-BMC) MB's LAN Bypass control BUS is I2C BUS, if user changes BIOS/SW GPIO Driver mode setting, the bypass I2C BUS ID will be changed , too.

(PS: FWA-3034R(With BMC ) bypass  I2C BUS ID doesn't changed after setting  BIOS/SW GPIO Driver mode)

2.  Suggesting user use apdi command to create Advanced LAN bypass configuration file (lbpcu.cfg), and copy this file to the same folder of Advanced LAN bypass utility (lbpcu) 

#  apdi -lbpcu.cfg

3. Please check the table as below, I2C BUS ID is different between "SW GPIO Driver mode: GPIO only" and "LED+GPIO", and the default setting of FWA-3034H BIOS/SW GPIO Driver mode is  LED+GPIO.

When user needs using I2C command to control FWA-3034H(non-BMC version) front panel LED, please remember to check lbpcu.cfg file setting after set BIOS/SW GPIO Driver mode as GPIO only 

SW GPIO Driver mode: GPIO only	SW GPIO Driver mode: LED+GPIO
eth_name: b06p0 SEGMENT: 102 TYPE: SYS_I2C BUS: 0.7.255 MCU_SEGMENT: 1 eth_name: b08p0 SEGMENT: 103 TYPE: SYS_I2C BUS: 0.7.255 MCU_SEGMENT: 2 TYPE:PCIE	eth_name: b06p0 SEGMENT: 102 TYPE: SYS_I2C BUS: 8.255.255 MCU_SEGMENT: 1 eth_name: b08p0 SEGMENT: 103 TYPE: SYS_I2C BUS: 8.255.255 MCU_SEGMENT: 2 TYPE:PCIE